This is one of the same clamps used on our Balun Mounting Plate and is excellent for a boom or mast requiring a small footprint. Constructed as a stainless steel clamp but with a stainless mounting stud welded to the clamp body. Works well with any shape boom or mast (round, square etc.) and allows rotation of the balun enclosure for off center axis mounting. Inside the enclosure, a Nylok nut is used over a star lock washer to ensure the clamp will not loosen up under any circumstances.
Different sizes for mounting requirements from 1.5 inches (13mm) to 3.25 inches (59mm). Several other sizes are available, but may require special ordering. Please contact us for additional information. Shipping is free with the purchase of a balun or unun.
Unless otherwise instructed, with each order we will install the clamp on your enclosure as shown in the photo above. Please contact us if you have a special requirement.
The SSC2 clamp cannot be used with the small black (QRP) enclosures. Select the Model NLM2 mounting system for the smaller size units.
Balun in photo is for illustrative purposes only and is NOT included.