Units by Antenna Type

Building on the original 1:1 design by Dr. Jerry Sevick, this balun has two (2) low permeability cores in a stacked configuration to maximize choking impedance on HF bands from 7- 54MHz. By utilizing Mil-Spec coax, the SWR, transformation and power...

Our "i" series of feedline isolation baluns provide excellent feedline decoupling and, depending on the model selected, low loss performance across the full HF spectrum. The model 1115di is a dual core design that will handle 5kW...

This Isolation balun is identical in design to the Model 1115d but with one key exception. The toroid material utilized for the two stacked cores is optimized for the lower HF bands and provides exceptional choking impedance at these frequencies. In...

Our "i" series of feedline isolation baluns provide excellent feedline decoupling and, depending on the model selected, low loss performance across the full HF spectrum. The model 1116di is a dual core design that will handle 5kW...

This is a departure from the normal 1:1 isolation/choke balun and utilizes a bifilar pair designed to maximize inter winding breakdown voltage found on multiband antennas such as doublets and multiband loops. The 1161 is NOT recommended for use with...

This is a departure from the normal 1:1 isolation/choke balun and utilizes a bifilar pair designed to handle the high voltages typically found on multiband antennas such as doublets and multiband loops. The balun functions to transform balanced twin...

This balun is an excellent step up from the model 4113 and is not sensitive to high power reflected RF like the model 4115.  The design is the perfect choice for two types of operation.  First, if you transmit high power (=>1kW) in to a...

Heavy duty 5kW, 4:1 unun designed for use with wire verticals, long wires and multiband monopole verticals. Utilizes stacked cores to deliver efficient broadband performance and high power rating across all HF frequencies. Works well with both internal...

For those that enjoy the LNR and Hy Endfed antennas, but want to run more power, Balun Designs now offers an excellent alternative.  Built with the same craftsmanship as all our other units, this new model will allow you to either replace your...

Based on the success of our model 4932, this 5kW configuration is also perfect for matching both long and short length wire antennas for multiband use.  When used with the stated lengths shown in the table below, the 9:1 ratio...