Ferrite Toroid- Low Permeability
- SKU:
- Ferrite-G
- Shipping:
- Calculated at Checkout
Frequently bought together:
Description
This is low permeability (<300) custom ferrite mix used by Balun Designs for most wire wound designs.
- Best permeability for most wire wound baluns and ununs. Not recommended for EFHW.
- Can be used bare or inserted in Teflon tubing for very high inter conductor voltage breakdown and or to manage characteristic impedance.
Related Products
Related Products
Double Height Ferrite Toroid - Low Permeability
$25.50
This assembly is a double stack of a low permeability (<300) toroids, a custom ferrite mix used by Balun Designs for most wire wound designs.
This mix is the best choice for a coaxial wound...
Ferrite Toroid - Medium Permeability
$10.95
This is a mix 43, medium permeability toroid best for moderate power (<= 500w) EFHW designs and choking above 40 MHz.
Ferrite Toroid - High Permeability
$11.95
Full size (2.4") mix 31 ferrite with white identifying color and surface sealer/coating that provides excellent long term weatherproofing.
Double Height Ferrite - High Permeability
$24.75
This assembly is a double stack of mix 31 toroids, a high permeability mix used by Balun Designs for many coax wound 1:1 baluns.
High pe
Double Height Ferrite - Medium Permeability
$21.95
This assembly is a double stack of medium permeability mix 43 toroids.
Best choice for medium to high power End Fed Half Wave transformers (=< 1kW)