Description
Package of 10 tinned copper, heavy duty ring terminals. These fit our 1/4" studs and are designed for 10 or 12 gauge wire either solid and stranded.
Note these terminals fit only the 1/4" studs on our standard grey enclosure. They are too large for the studs on the smaller black QRP enclosure.
Related Products
#8 Ring Terminals
MSRP:
Now:
$1.55
Was:
Package of 10 tinned copper #8 ring terminals. These fit the #8 studs used on our small black QRP models and will accept wire sizes up to 14 gauge.
Note
1/4" Hook Ring Terminals
MSRP:
Now:
$1.10
Was:
Package of 4 tinned copper, heavy duty ring terminals. These are custom cut to easily slide under the outer locking nut of the 1/4" eyebolts used on our suffix "e", ...
Next Availability 12/1

SSC2 - Mounting Clamp for Balun or Unun
MSRP:
Now:
$16.95
Was:
This is one of the same clamps used on our Balun Mounting Plate and is excellent for a boom or mast requiring a small footprint. Constructed as a stainless steel clamp but with a stainless...

TEB1 - Top Support Eyebolt
MSRP:
Now:
$1.95
Was:
Additional eyebolt for the top of a balun or unun to allow hanging from a yard arm, hoisting up in a tree or whatever. All stainless steel hardware includes outer locking nut with...
Customers Also Viewed
#8 Ring Terminals
MSRP:
Now:
$1.55
Was:
Package of 10 tinned copper #8 ring terminals. These fit the #8 studs used on our small black QRP models and will accept wire sizes up to 14 gauge.
Note...
1/4" Hook Ring Terminals
MSRP:
Now:
$1.10
Was:
Package of 4 tinned copper, heavy duty ring terminals. These are custom cut to easily slide under the outer locking nut of the 1/4" eyebolts used on our suffix "e", ...
Next Availability 12/1


Model 1115 - 1:1 Balun, 1.5-54 MHz, 3kW
MSRP:
Now:
$78.95
Was:
Balun Designs, in collaboration with Fair Rite products, has developed what we consider to be the best single core 1:1 feedline isolation balun available today. By reviewing the scans shown below you...
Next Availability 12/1


BMP1 - Mounting Plate for Balun or Unun
MSRP:
Now:
$36.95
Was:
Nice 8X6 inch, UV protected, 1/4" thick polymer mounting plate for attaching balun or unun to mast, boom, tower or whatever. Includes 2 stainless steel clamps of your choice in...
Next Availability 12/1


Optional RF Connectors
MSRP:
Now:
$4.00
Was:
Alternative RF connector rather than the standard SO-239 UHF connector. Choose an N or BNC connector for installation with your balun / unun purchase and, of course, no...
Next Availability 12/1

Model 1115d - Max Choking 1:1 Balun, 1.5-54 MHz, 5kW
MSRP:
Now:
$94.95
Was:
Designed for those who want the maximum isolation and choking across the full HF spectrum. Building on the original 1:1 design by Dr. Jerry Sevick, this balun has two (2) cores in a stacked...

Dipole Plate - DLP5
MSRP:
Now:
$14.95
Was:
Strong polymer plate for center insulator and strain relief when constructing large or multiband dipoles. Includes all stainless steel hardware for mounting a Balun Designs standard...
Next Availability 12/1

Model 1116d - 1:1 Balun, Optimized for Low Bands, 5kW
MSRP:
Now:
$94.95
Was:
This Isolation balun is an identical design to the Model 1115d with one key exception. The material utilized for the two stacked cores is optimized for the lower HF bands and provides...

Dipole Plate for Low Power Units - QDP7
MSRP:
Now:
$14.95
Was:
Strong polymer plate custom sized to be the center insulator and strain relief when constructing a portable or temporary dipole. Includes all stainless steel hardware for mounting a...
Next Availability 12/1


Model 1142s - 1:1 FCP Isolation Transformer 2kW
MSRP:
Now:
$121.95
Was:
This is a unique 1:1 transmission line transformer intended to provide highest possible isolation between input and output. Consequently there is no direct electrical connection...